03-30-2004, 02:11 PM
|
 |
Senior Club Cobra Member
|
|
|
Join Date: Jun 1999
Location: Dublin,
CA
Cobra Make, Engine: TBD
Posts: 1,298
|
|
Not Ranked
Hi guys,
Thanks Alan......Put it inside the hole where the hub cap is removed, the three slots fit over the ears of the spinner, hold it on the end, hit it with as big a hammer as you want and the spinner comes off. Be careful when you use it to put them on because you will only be able to get them off with the tool....don't know the torque rating but it puts them on tight and always gets them off.
Always use anti sieze compound on the spinner !!!!
BTW Alan A has them for sale....he and Rick427 have worked out a deal.
Beauty is in the eye of the Cobra owner with a stuck spinner !! 
Tony R.
Last edited by Tony Ripepi; 03-30-2004 at 02:15 PM..
|
Threaded Mode
