04-27-2004, 03:24 PM
|
|
CC Member
|
|
|
Join Date: Nov 2003
Location: flowood,
ms
Cobra Make, Engine: shell valley, 302 ford racing
Posts: 90
|
|
Not Ranked
clutch cable delimma
hey guys,
just got the body on the SV and after hooking up the clutch cable have discovered i have no play in the pedal and no adjustment left on the cable. the car has a 302 with a MCCloud BH with tremec 3550. i bought the clutch release arm, BH, and tranny from the same location so "figured" they would match. the cable is from SV. after talking with dana and Zoomer at SV, i find that SV only supplies the cable i have. does anyone out there have the same basic setup that can give me any ideas on another cable that will fit, work properly and provide some adjustment. the spring on the clutch end of the cable, with pedal depressed is completely compressed to the point of "stacking", which of course abruptly stops any further clutch movement. the clutch is disengageing but with no adjustment, this is completely unsat.
any ideas / thoughts appreciated
outlaw
|
Threaded Mode
