Csx2166

[BMK]

PDHse

I was going to suggest that you contact the registry and noticed that Ned had 'Posted'.

With the re build body etc. I wonder what it would be worth and what it's value may have been if left in the original stylepatricularly CSX 2166 that was converted into the coupe,...

[PDHse]

Thanks for the info guys, i think the Sebring car could be my next 1/24 scale model project.

[PDHse]

Well i finished the model , not a bad job. Soldering the nose guard was not fun as im new at that When i glued it on , its sunk one side . The vents on the bonnet and nose came out alright, just need a tiny tiny thin red wire to look like a bunjie cord to go around the boot handle.
I reshaped the wheel arches too. What d`ya think?

[PDHse]

Im just going to hi jack my own thread with pictures of another Cobra model i have just finished. Its an old white metal model made in the early 1970`s by MIKANSUE. As its old, the model is quite basic and the front wheels are too small but i did,nt want to change them with different ones as it would,nt be totally original .
The shade of green is a little bit lighter but not much.
Here is the MIKANSUE 1/43 scale AC Cobra Le Mans Coupe.