Weber Look A Like Fuel Injection!

Great Asp · #1 (**permalink**) 04-17-2009, 11:31 AM

Quote:

Originally Posted by Garage10

Hi everyone
Just to let you know. I sent dynatek an e-mail asking a few ? about a system for a 460 on apr 11/09 and still have not had a response from them. Not sure how many people work there but you would think a response within a week would be achievable. Not real great potential customer service. Eric, how did you find their customer service ?
Thanks
Brent

Brent, despite the issues we had during start-up and tuning, they always picked up the phone or answered e-mails promptly. Richard was in the mountains for a while between LA and Vegas, but he had no cell service. I would have to rate their customer service as "high".

Call their number and ask for Thomas Hank at Dynatek, he can get you started.

Eric

Neil O · #2 (**permalink**) 04-17-2009, 11:57 AM

Thanks for the welcomes guys.

Eric, no, I didn't know there was a choice of ECU. Didn't even realise that I should have asked.....doh.

The tuning information Tom sent me looked pretty straight forward and he has loaded it with a base map that he says will be very close to what I need.
My dyno guy has the paperwork at the moment and hasn't suggested any problems so far....

RodKnock, I will probably start a new thread with the install and findings etc. No doubt it will wander off topic like all threads tend to (I'm one of the worst).
I can assure you my true thoughts will be expressed on the thread. I am not connected to any FI manufacturer (I'm a book binder) and have no axe to grind about carbs.

Great Asp · #3 (**permalink**) 04-17-2009, 01:11 PM

Neil,

I did not know I had a choice in ECU's, and could not tell you specifically that there is anything wrong with the standard unit.

But per e-mails recently back and forth with Dynatek's Thomas Hank, I discovered that they have an upgraded ECU available, and as I posted above the guy making the wiring harnesses for Dynatek said he could make the harness for a FAST ECU if I wanted it.

The only reason I bring it up is that someone here might like one brand ECU over another, and I do not believe Dynatek cares if you want "Brand-X" ECU.

Food for thought

Eric