Which Company makes "best" replica?

[Dinobyte]

To compare, you need to compare apples to apples.

Same motor in all cars...since we are talking the SC, then it has to be the 427 FE.

For the SB guys, we will allow a 427 Windsor with 500 or so HP.
(We don't want to upset the SB guys too much with that size thing again.)

Start off with Weighing the cars...measuring the cars (width, length, ride height).

Have a panel look at the cars for fit, comfort, ease of driving.

Rate the car on authenticity based on an agreed upon criteria.

Measure the 0-60, 0-100, 1/4 mile, time to lap Willow Springs (etc...pick your track), so as to understand the performance characteristics of each car given the same power plant.

Next we need to measure the skid pad rating for each.

Then we need equipment to measure the cars responsiveness to lane changes...how fast through the slalom, etc.

Now the bracking....going 100 MPH, slam on the brakes..how quickly does it stop...120 MPH...brakes...how quickly does it stop....140 MPH...brakes, etc.

Now 0-100-0 time...how fast.

0 to 100 time

0 to 120 time

0 to 140 time

All of these measures should be able to provide not only performance in like prepared cars, but also tell us when equipment starts to break.

Last but not least, cost to purchase each car with the identical equipment.


If the kit companies and an engine builder could prepare the various common engines, then we would have real data to look at and not just some BS opinion of someone who thinks they know which car is better. Put them through the Car and Driver test and see who wins. How dumb is that?