Venom Cobra Build

[Zedn]

Originally Posted by sevenohms

Rad is a HZ turned sidewards, laid back with a thermo fan, or a least thats the plan when i ask desert rads to make me one up.

Nathan

Hi Nathan,

My chassis is almost identical. Doug Pearce is worth talking to about radiators if you havent already. On my kit he said he has a mod to fit it vertically. Probably the same with yours.

Slanted radiators usually are a different design. I had one in an old 300zx and the radiator fins were different. That being said there are lots of people that put a standard radiator on an angle without any problems.

[sevenohms]

Originally Posted by Zedn

Hi Nathan,

My chassis is almost identical. Doug Pearce is worth talking to about radiators if you havent already. On my kit he said he has a mod to fit it vertically. Probably the same with yours.

Slanted radiators usually are a different design. I had one in an old 300zx and the radiator fins were different. That being said there are lots of people that put a standard radiator on an angle without any problems.

Since I'm getting custom from Desert I'll let them know that its slanted, plus i'd figure I'd run a 16" thermo fan, running off the standard Ford electronics and let the car handle it itself?

Nathan