ADR 3/03 seats

[Modena]

Current shape MX5 do not fit in a Classic Revival, along with about 20 other small and sports cars that I have checked.

[justcobra]

Originally Posted by Modena

Current shape MX5 do not fit in a Classic Revival, along with about 20 other small and sports cars that I have checked.

I just bought a set of MX5 seats out of NA model(ebay) and which to concur that the seats will not fit my RMC Cobra which is a copy of Arntz cobra out of the States.
The MX5 seats donot have to be modified but the internal sunken floor and its configuration has to be modified by cutting and re-fibreglassing.
I bought a pair of seats on ebay for $100 which are red in color and they were fitted to a older Cobra circa 1987 which were specifically designed for a DAX cobra.
A batch of DAX cobras were imported in Victoria in the late 1980's in suburb of Brighton as advised by this gentleman who lives in Gippsland.

These seats are a modified SAAS seat specifically built for the cobra but I consider them to be too narrow for my back side.
Apparently the seats are brand new and the previous owner decided not to use them in his cobra and elected to buy a brand new seats from Tony at Classic Motor Trimmers at Eltham presumably acquired for $2200.
It is good to work in Gold Mine!
Tony has told me that his seats are NOW ADR3-03 complied and will validate.

[hp1050]

We used a set of seats out of an S2000 Honda they fit very nicely and not to high.