ADR 3/03 seats

[justcobra]

Originally Posted by GTS

Hi Guys,
Thank you for the drawing and measurements.
Does anyone know exactly how the proceedings are for the ADR approval.Most of our seats are steel tube frames with welded mounting points and in the Fiberglass seats we make big plates that are laminated into the ready made shell for ridgidy.Even if we have adjusters at the side we have an additional steel framing inside that is laminated to the seat back and bottom.How can we have these approved by the ADR ? Again we are in the US and not familiar with the proceedings and in's down under,sorry.

Hi Stefan.

It appears that "NO ONE" in the community down under has provided any guidance to the procedure in getting your seats certified.

I know of two manufacturers that manufacture the cobra seats in Victoria.

One is located in Eltham Victoria and the other only makes the seat frame all purportedly comply with the ADR 3-03 seat rule.

Both are listed in this thread and for your information are Classic Interiors and Kenmer Engineering .

Email and phone numbers are available.

Both use their own mechanical engineer

Classic Seat Pricing is through the STRATOSPHERE and you have to work in A GOLD MINE.

I could import AC Cobra Traditional/Classic seats that meet IVA rules far cheaper from UK than buying locally.

I could suggest Enkelmans who could gladly assist with your problem.

Your thumb nail photos are GREAT and you will note that Classic Interior seats and the Kenmer Seat frame are ALL STEEL.

We need competition and I hope you can gain the necessary paper approved for export.

If you need a distributor please PM me.