Making progress!

Zedn · #1 (**permalink**) 06-16-2013, 05:09 AM

Got some more work done on the headers.

This is the drivers side. Very tight, and then throw in the steering shaft just to make it tricky!

Had to do a lot of pie cuts to get the tight bends.

sevenohms · #2 (**permalink**) 06-21-2013, 04:14 AM

Quote:

Originally Posted by Zedn

Got some more work done on the headers.

This is the drivers side. Very tight, and then throw in the steering shaft just to make it tricky!

Had to do a lot of pie cuts to get the tight bends.

I've done that, and mine were very average. Great job!

AC-460 · #3 (**permalink**) 07-05-2013, 01:09 AM

Best way to keep those flanges straight when your welding them up is to find yourself an old head and bolt them up tight and weld them on when there rock solid... Ive seen people do this before its very hard to keep them straight unless you let them cool with them bolted up tight

Quote:

Originally Posted by Zedn

Got some more work done on the headers.

This is the drivers side. Very tight, and then throw in the steering shaft just to make it tricky!

Had to do a lot of pie cuts to get the tight bends.