Accusumps

[Gav]

Thanks folks, I think I will be fitting it on the front cross member down low.
I don't run an oil cooler so it will get plumbed straight into a port next to the oil filter.

I also bought mine with the solanoid and pressure switch, the pre oiling thing is questionable but can't hurt, but given it doesn't run too often might be a good thing.

[spookypt]

Gav, I used a one way valve in the hose on the oil cooler side of the "T" junction where my accusump plumbs to, to avoid sending oil back down the line towards the cooler rather than into the block where its supposed to go.


Spookypt