09-13-2015, 09:50 PM
|
 |
CC Member
|
|
|
Join Date: Jan 2001
Location: Sunbury,
VIC
Cobra Make, Engine: Rat Rod Racer, LS1 & T56
Posts: 5,391
|
|
Not Ranked
I've got a #6 inline fitting for a gauge port lying around. It might be worth putting it in line with a pressure gauge attached and seeing what sort of pressure you have in your swirl pot. I'd been told it's good to have about 2 PSI pressure in the swirl pot and this can be achieved by putting a restrictor in the return line from the swirl pot to the main tank.
With the swirl pot partly pressurized you will always have positive feed to the pump.
Cheers
__________________
Mike Murphy
Melbourne Australia
|
327Likes
Threaded Mode
