Pace 427 Alumina #69

albanycobra · #1 (**permalink**) 05-30-2016, 05:01 PM

Craig not sure but iron is the go and 9.5 deck height but could do a 8.2 deck block and a 347 as well. Will look at all options.

Wil it's been great talking to you and I have enjoyed our offline conversations as well. I will talk more to about your build. Over here we do a free rev emission test. Idle and 3000 rpm. I would have to use a very stock grind cam shaft, and really good cats. All doable.

ICCARS · #2 (**permalink**) 05-30-2016, 05:05 PM

Quote:

Originally Posted by albanycobra

Craig not sure but iron is the go and 9.5 deck height but could do a 8.2 deck block and a 347 as well. Will look at all options.

Wil it's been great talking to you and I have enjoyed our offline conversations as well. I will talk more to about your build. Over here we do a free rev emission test. Idle and 3000 rpm. I would have to use a very stock grind cam shaft, and really good cats. All doable.

Lucky guys in W.A. the cost for an IM240 emission cycle test here in S.A. I am led to believe is around the $1000 mark per test, so fail and pay, then try again and pay again...