10 yrs old CR Bulid need help please

[e-clip]

Looking at these wheels a modem take on the original cobra wheels.
What do you guys think ?
Any suggestions on size and offset for a square CR would be great help. Dan has suggested 10 wide and 7.5" backspace rear and 8 wide 5.5" back space front.

[Tenrocca]

These equate to a 3.5" front space from and back, which is exactly what I have, although my rears are 9.5's. Wouldn't want to go out any further and makes sure you have the body centred really well on the chassis.

Im planning on 15's this year, narrowing the rear so I can use the off the shelf Team 3 one piece or Factory five wheels with a little more dish. Will need a new front hub to bring in the fronts 0.25" and ford stud pattern and they should bolt right on.

[Gaz64]

Originally Posted by e-clip

Looking at these wheels a modem take on the original cobra wheels.
What do you guys think ?
Any suggestions on size and offset for a square CR would be great help. Dan has suggested 10 wide and 7.5" backspace rear and 8 wide 5.5" back space front.

I don't see how you could have that, since the spokes would be out at the outer rim face.

Gary

[e-clip]

Finally getting some stuff done. One more piece of the puzzle done.