Bullnose Toploader extension housing

ac andy · #1 (**permalink**) 11-11-2002, 04:37 AM

Hi guys,

I have a bullnose toploader with a long extension housing mated up to a 460BB. We have just done a trial fit into my cobra and we will end up with a tailshaft approx 9 inches long. Just wanting to know if there was ever a short extension housing and shaft available for these boxes or will I have to get a new shaft machined and shorten my existing housing to give me a longer tailshaft.

Any help would be appreciated,

Thanks, Andy.

427 S/O · #2 (**permalink**) 11-11-2002, 05:20 AM

davidkee@4speedtoploaders.com

750hp · #3 (**permalink**) 11-13-2002, 01:31 AM

Andy,
Do you have a live axle or IRS? If IRS, I wouldn't bother changing it...

ac andy · #4 (**permalink**) 11-14-2002, 05:00 AM

Hi Craig,
I've got a jag rear with a Ford 9" centre conversion, rough measurements suggest that with front yolk and rear uni joint, i will have about 40mm of actual tailshaft, just thought this might be a touch short.