12-03-2003, 01:16 AM
|
|
CC Member
|
|
|
Join Date: Nov 2003
Location: Sydney,
NSW
Cobra Make, Engine: G-Force 5.0lt HO EFI T5 Jag SeriesIII Suspension
Posts: 45
|
|
Not Ranked
Quote:
Originally posted by Adrian S
Stuart, thanks for making me get off my a... and upload some photos finally. I've only done 4 so far and looking at these, I really must take some more recent ones. Let me know if there is anything you are specifically interested in. What stage are you up to ?
|
Adrian, I was hoping to get few ideas on the following if thats ok.
I fitted the HX Kingswood accelerator pedalassy it seems to sit too low to the floor I asked Rob at G-Force if it needs to be modified and he said there should be enough room on the pedal box to fit it up higher.
I am not sure if you have fuel or gas, but I was wandering if the fuel tank brackets should be on top of the chassis rail or from underneath I have assumed from the underneath so the back of the tank does not protrude to far into the boot area.
I have the door opening mechanism and I thought before I start cutting holes where would be the best fitment and best way to secure to the door.
Thanks
Stuart |
Threaded Mode
