Got the nod

boxhead · #1 (**permalink**) 02-17-2004, 04:06 AM

Today is a happy day for me in the NT.

I recieved my paper work regarding construction of an Individually Constructed Vehicle (ICV) today and all was approved includeing the 2000 year model engine that I advised I would be fitting (quoted engine number too).

So I am happy that the panic I felt a couple of weeks ago after reading pneal's vin problems that I may not have the same hassles.

I also quoted the fitment of dual brake master cylinders without booster and all is ok with that too.

The vehicle needs to be inspected at 3 stages of construction being, A rolling chassis, Body attached to chassis & Completed vehicle.

I also have to provide an Engineers assesment certificate upon completion certifying that each stage has been carried out correctly.

Then once that is all done I take the vehicle to the MVR shed for final inspection.

I was so happy this afternoon when I finally got the letter and found all was ok to build, (I have been sweating on this).

WILDAC · #2 (**permalink**) 02-17-2004, 12:27 PM

Gday Boxhead,

Way to go,

, bet your glad thats all over?

cheers Robo

pneall · #3 (**permalink**) 02-17-2004, 05:34 PM

Congratulations. Glad all went well.Four more days for me and I will know if I pass engineering. My vehicle now at Classic Revival for wiring and exhaust. As long as there are no fuel/starting problems I should be ready for engineering Saturday PM or Sunday AM.

Regards,

Phil

boxhead · #4 (**permalink**) 02-18-2004, 02:31 AM

Thanks Robo & Phil.

I am glad to hear you are getting there with yours Phil, I will keep my fingers crossed you get everything done that you need to.
If you need any help with anything I am here to help, I may be along way away but it is only a phone call and I can fax you any wireing or diagnosis help you need regarding the gen III.

BMK · #5 (**permalink**) 02-18-2004, 02:41 AM

Boxhead

Well done mate. You are now well on your way. The three stage engineering inspection sounds straight forward.

Apart from the cost.

Have fun

Bernie

Aussie Mike · #6 (**permalink**) 02-18-2004, 05:05 PM

That's excellent news David!

I've been making some similar enquiries down here and I think we are OK till the end of the year. I better get cracking and get mine finished.

Cheers