Jag Front Sway Bar Mounting

[Churchy]

Hi Gang,

OK, a small production run has been planned and I should have them finished around the end of the month. I am heading over to Perth next week to watch the Wallabies smash the Irish tourists (Go you good things !!). And with the new Work Place Agreements. I am not allolwed to take the mill/lath on the plane.

When I have them finished I will grab all your address's. I will also find out this weekend, if all the Ford parts are available and get you part numbers. No point in shipping stuff that could be right next door to you.

Cheers

[RODA]

Churchy

You can count me in on a couple of those shinny aluminium thingies as well.

What are those black thingies above the aluminum thingies, cause I need 2 of those as well.

If you can let me know what they are that would a great help.

Phil any chance of a photo of how you have mounted your sway. Have you used black and aluminium thingies as well

Rod

[Churchy]

Roda,

The black thingies are the Ford rear sway bar attachment units. They mount between the rear lower control arm and the rear sway bar. And seeing as Ford had done such a great job of these (and I had 2 laying around), i used Mr Ford's brilliant idea.

The shiny aluminium thingies have not started production as yet. I will probably start on these in around 2 weeks time. I've got a Wallabies game to attend. Yipee...

Cheers Churchy

[cobbindale]

There are a number of link setups available from Pedders.
The one that looks close to Marks picture is the 4204 which has 10mm threads and 60mm between centers. They are around $52 each and are from front sway bars for Camry, Corolla, and Apollo's.

The larger 4208 is listed as the AU Ford rear sway bar link (and about 60 other cars) and can be cut to size. The threaded rod is fixed to one joint and screws into the other as shown in the picture at around $55 each. Instead of using both joints on one side, it may be possible to use traditional bushings (jag setup) at the jag control arm mount and the new ball joint at the sway bar requiring only one unit instead of two. A nice polished peice of stainless tube to cover the thread perhaps. Just a though and depends on mount positions.



Cheers,
Dale

[RODA]

Churchy

Thanks for the info I think I will also use Mr Ford's idea.

Dale

I am going to go to pedders and get 2 of black thingies that Mr Ford used. Do you think my descripstion will be good enough.


Rod

[Churchy]

Guys,

I would suggest the Pedders unit as Mr Ford wants $68 for his units. The mounting nut for the shiny aluminium thingie is an M12 nyloc nut.

So, Pedders for the black thingies. Churchy for the shiny aluminium thingies and your favourite M12 nyloc nut supplier.

Cheers

[PhilChis]

Hi Churchy

Could you count me in for a set of your patentented "shiny things". Let me know price etc when you are ready

Many thanks
Philip Chisholm