Raising the ride height of the rear

[ASO544]

Thanks.....that's the way I went ( and what I meant to say) but I'm struggling to get my drivers side level with my passenger side. I still have an inch or two of threads on my passenger side but my drivers side is all the way up and I'm still 1/2"-3/4" lower than the passenger side.

Is it safe or possible to shim between the threaded stud and the body to get a little extra height ?

[Ron61]

Could you lower the passenger side a bit without causing a tire rub problem? The shims should work, but I have never been a fan of that since a friend had his cause a big problem, but he had shimmed his up almost an inch. If you can just do a little and don't intend to drive the car really hard, you would most likely be OK.

Ron