Some new cool stuff for my BDR426

[tamanaco]

lug nut cover are nice. man...you talk about cheaten did you make them or buy them?

[Blittleton]

you can get them thru Team 3 Wheels. Either standard or polished.

Bill

[Burnd]

Originally Posted by Blittleton

you can get them thru Team 3 Wheels. Either standard or polished.
Bill

Clever; but I can't figure out "what or how" they are attached?? Is it a solid, secure attachment? Two years ago I had a spinner on the front driverside wheel ricochet off the pavement and go flying by my head at 65 miles an hour. Believer me, it gets your attention. It whistled like a 122mm rocket coming in, that I distinctly still remember hearing in Vietnam.

Bernie

[JayBar]

Lug nut covers, assuming you have the Team 3 wheels are $125.00 go to
http://www.etwheels.com/ac/ at the very bottom of the page.
You will have to change your lug nuts. The chrome caped nuts are to long.
You need plane old lug nuts.

[Burnd]

Originally Posted by JayBar

Lug nut covers, assuming you have the Team 3 wheels are $125.00 go to
http://www.etwheels.com/ac/ at the very bottom of the page.
You will have to change your lug nuts. The chrome caped nuts are to long.
You need plane old lug nuts.

I have Compomotive halibrands so i don't know if they would work. I already have ugly lug nuts because it's reguired for racing. Tech has to be able to see the bolt all the way throught the nut.

Think they would work on Compomotives? My spinner comes off with 3 set screws which catch a recess on the inside. I would assume that the only thing that would matter was the diameter of the lug hole. They're a Ford spacing with 5 on 4 1/2" which is standard.

bernie