304 Stainless Steel Roll Bar Group Buy - taking orders now.

[locknload223]

I'm interested in a driver's side but have some questions (I'm very new to Cobras).

Mine has the soft top hardware in the body, will the third leg mount inboard of those? And I have to make the mounting brackets that get welded to the tubes then bolt to the frame, correct?

I have a '91 build car, thanks.

[Wisconsin_Snake]

Originally Posted by locknload223

I'm interested in a driver's side but have some questions (I'm very new to Cobras).

Mine has the soft top hardware in the body, will the third leg mount inboard of those? And I have to make the mounting brackets that get welded to the tubes then bolt to the frame, correct?

I have a '91 build car, thanks.

The specs are off of the original roll bar for the Classic Roadsters so the 3rd leg will reside inside the soft top (otherwise I, who also has a soft top will be very pissed) .
You are correct that you will have to make the mounting brackets. I will try to secure some additional 1-3/4 tube for that.

Sorry for the delay in responding, the ClubCobra site was down the last couple of days.

Wisconsin_Snake.