04-03-2009, 10:31 AM
|
|
CC Member
|
|
|
Join Date: May 2001
Location: Irvine, CA.,
CA
Cobra Make, Engine: Classic Roadster 427SC, 351W bored .30, Edelbrock Performer RPM Package, Tremec trans, Currie 9" rear end.
Posts: 50
|
|
Not Ranked
Thank You. my specs are outlined earlier in this thread but to answer your questions, I am running Hoosier R6 road race radials, Rear 275 springs with the adjustable spring perches(stock CR) and pro shocks, rear (CR stock) sway bar and no sway bar in front ( as suggested by DV). I also have a 9 inch Currie rear end with the 4 link (8.8) setup, I boxed in my lower control arms. Has anyone come up with a design or photo's for a lighter front sway bar, I don't have my old one for a template?
I am still researching and considering changing to watts 5 link but of course it would have to be custom built which is beyond my abilities. I just came across the Fays2 watts link which looks to be fairly universal and just might work with some frame points welded on.
I will send you a private message with a photo of my car so you can locate me at Willow. We always park with the COCOA of Orange County group behind the stands just before turn 1 (close to braking point)
|
Threaded Mode
