Hurricane HMS2002 build thread

dlampe · #1 (**permalink**) 05-06-2010, 07:28 PM

Thanks for the complements guys, the car is really coming along nicely. The side pipes will come out of the side eventually. I haven't cut the holes. I have some fiberglass molds also that Hurricane gave me to make a template for future cars. Since this is really the first car and the molds where changed a little, we didn't want to make any cuts until the engine was in the car. I do like the 289's but they were not ready to build one for me.

I have big plans for the weekend. More pictures to follow soon.

YerDugliness · #2 (**permalink**) 05-13-2010, 11:20 AM

Quote:

Originally Posted by dlampe

I do like the 289's but they were not ready to build one for me.

Dean, is Hurricane going to offer a 289 body style? I had hoped Arps & Burroughs would do so, but they sold off first. I do know they had a 289 body sitting on one of their frames, I saw it in Lee's Summit.

Dugly

gsharapa · #3 (**permalink**) 05-14-2010, 05:16 PM

I actually asked Hurricane if there were any plans for a 289 FIA and the answer was not in the near future. They might consider a second model but it appears it would be a couple.

mr bruce · #4 (**permalink**) 05-14-2010, 06:32 PM

Just before Hurricaine was sold the first time, I almost had a frame and inner tub shipped to me to put one of my bodies on, but time ran out and the company was sold. I still make the Slab and FiA bodys that fit the Hurricaine frame, sumbuddy want to send me a frame/tub?, presto, 289 Hurricaine . http://rides.webshots.com/album/577255095igXDvY

dlampe · #5 (**permalink**) 05-16-2010, 08:05 AM

I have decided to continue the build thread under Hurricane HMS2002 part II. The thread is located here

Hurricane HMS2002 build thread part II

This is the section that will cover the installation of the opt inion. I'll see you guys on the Part II thread!

Here are the finished pictures.

http://www.clubcobra.com/forums/show...90#post1071890