AP2289 Build log 'stage 2'

[xb-60]

I’ve been working on the windscreen wiper installation on-and-off for the last month. I was originally going to mount the wiper motor to the top of the LHS footwell, but decided to mount it on the firewall under the dash instead. It seemed that the straighter route from the wiper motor to the spindles would be best, so an under the dash mounting was the decision (despite the ‘challenging’ access).

Here’s what it ended up looking like….



and...

[xb-60]

The wiper mounted on the inside of the firewall and under the dash required a 'concession' from the glovebox....

[1795]

You'll have to roll your gloves up into a ball to keep everything from falling out of your glove box Glen. Don't want that bottle opener to fall out and get lost...

[xb-60]

Jim - the glovebox is the bigger item in the picture, not the smaller one

[xb-60]

Progress report....

Demisters sealed onto their mounts, and now fitted in position on the underside of the cowl. Demister vents are also fitted.

[xb-60]

Here's one of the demister louvres...

edit: how do you attach 2 files in a post?

[xb-60]

Finally have the demisters fitted....


Cheers,
Glen