A&C or F5 or B&B???

[plumbcrazy1]

Scott,

I will be happy to give you my opinion on 2 of the companies that you are asking about...A & C and B & B as my husband and I each have one of thier cars. I'll start with the B&B as it was the first we purchased. At the time the were known as LA Exotics. ( Same company, different name) In 1993 my husband ordered his car and we were thrilled.There are good and bad points. They were very prompt, which is important. The body sits lower on the frame than an A & C and gives the car a very sleek, low profile look. It really does look like it slithers. That is my favorite attribute. The floor of the car ( the foot boxes are also a bit bigger and roomier than that of A & C and the seats sit a little higher so it is a very comfy, roomy ride. The bad points we have come across during/after the build. We didn't recieve the seats we had ordered and 2 years into the build I was still fighting for them. I got a little nasty and finally got them.....There were about 15 colors to choose from. The color he ordered for the gelcoat was a guardsman blue. Upon shipment from CA to PA the car arrived and it was a Miata blue (you know, like a sky blue...) A far cry from Guardsman. Our option was to pay to have the car shipped BACK (after already paying $2000 to have it shipped here...) and they would "fix" it. We didn't have another $2000. It is still Miata blue and will be painted soon to guardsman blue. The wiring harness (painless wiring) was a nightmare! Use ANYTHING but that. And lastly we were very disappointed in the fiberglassing. Areas around the wheel wells were weak, thin and flimsy. We had to do alot of fiberglassing build up to make the body more sound. Now, that all said.....After we did what we needed to do it is a great car. During the build it aquired a nasty scratch on the hood that buffed right out and I do think that now that they are "B & B" they are more reliable with more experience. At Carlisle 2 years ago I looked at thier product for a car for me. It felt stronger and looked as good as my husband's and they offer financing, if you need that. The master mechanic who built my husbands car has an A & C himself . It was the first one we had seen. When I decided to get one of my own I went up to the plant and met Sonny. He was very helpful and Joe took me around and showed me everything. I met all of the guys and was impressed with the workmanship that I saw. The bodies that they had there were impeccable. Thick and solid. You could choose any non-metallic color you wanted and they would match it. Everything that I ordered was ready at pick up except for my interior kit, and that came about 2 weeks later. While the car was being created I called every couple of weeks to check the progress...I'm sure I was a pain in the butt but Joe and Sonny were always very nice. The wiring was easy...all color coated and labeled. Anyway, I have no complaints with my A & C. I would love it to sit lower on the frame like the B & B but each car is different so I'll take mine happily for what it is. I am currently helping the mechanic build one for another client and it is just as beautiful. I chose my color (plumb-why be like everyone else?) from a nail polish and they matched it perfectly. I did like having the ability to chose any color that I wanted. During the build if I needed anything they were right there to help or offer suggestions. I was very pleased and sent a letter to Curt at Cobracountry.com. As far as the fiberglass goes on the A & C the holes cut out for the roll bar and the side pipes are a good 3/4 inch thick (I'll gladly send you a plumb colored piece, if you'd like) the pieces on my husband's are is a 1/2 inch or less for the roll bar area and a good bit less than that where the side pipes were cut. I do not want to sound like we are totally unhappy with the LA Exotic/B & B build....we do love the car and wouldn't trade it now that it's done but it did require some extra work. This was just our experience........ultimately whatever you choose will have it's ups & downs whether it's with the kit itself or just obstacles you run into during the build. In the end you will love your car, whoever makes it, and smile as big as we do.

Dawn