Contemporary Cobra Watts Linkage

PDUB · #1 (**permalink**) 08-24-2010, 01:36 AM

Daze, got any pics with the calipers in place? I'm curious about picking up the mounting points for a Watts link... top and side views.

PDUB · #2 (**permalink**) 08-24-2010, 01:40 AM

Nick, are those caliper mounting points on the hub strong enough to hold a bracket for the Watts link? Not sure if there is room for one, but...

Dazecars · #3 (**permalink**) 08-27-2010, 05:18 PM

Quote:

Originally Posted by PDUB

Daze, got any pics with the calipers in place? I'm curious about picking up the mounting points for a Watts link... top and side views.

Sorry it has taken me a few days to get back to you, I have been very busy. I don't have any pictures, but I can take some if you can weight tell next week.

PDUB · #4 (**permalink**) 08-28-2010, 10:20 PM

Quote:

Originally Posted by Dazecars

Sorry it has taken me a few days to get back to you, I have been very busy. I don't have any pictures, but I can take some if you can weight tell next week.

No prob.

Dazecars · #5 (**permalink**) 09-01-2010, 09:37 AM

Quote:

Originally Posted by PDUB

Daze, got any pics with the calipers in place? I'm curious about picking up the mounting points for a Watts link... top and side views.

well here it is, better late than never.

The caliper bolts go threw the hub and screw in to the caliper. If I was doing it I would use the upper caliper mount. The ABS sensor hole on the top, and the tab, opposite the caliper (pointed an arrow to) this tab is roughly a mirror image of the top caliper tab, is around 1" think and could easily be drilled and taped to achieve a third mounting point.