Roush gasket leak

[Kirk V]

So my antifreeze leak has been found and repaired, the gasket under the front corner of the intake manifold was the culprit. For that matter every corner looked almost this bad but this one had a little geyser shooting up out of it.

I had to remove the Borland 8 stack EFI and the manifold, clean it all up and put new felpro gaskets down and torque to the correct specs.

I saw a video where someone recommended not putting rtv under the felpro around the water ports as it can cause the gasket to slip like this one had done.

A bummer to keep finding leakers on my car but fixing and driving is what we do.
I put on some new hoses while I was at it.
[/IMG]