Dan,
If the lower rad hose is touching the antiroll bar, you can zip tie a piece of rubber or vinyl (like an old car mat piece) in place to stop chafing. The hose expands slightly when hot.
Cobra Make, Engine: ERA Street Roadster #782 with 459 cu in FE KC engine, toploader, 3.31
Posts: 4,533
Not Ranked
Quote:
Originally Posted by ERA Chas
Dan,
If the lower rad hose is touching the antiroll bar, you can zip tie a piece of rubber or vinyl (like an old car mat piece) in place to stop chafing. The hose expands slightly when hot.
I'll have to check. I think it clears the roll bar OK but I did notice again today that it only clears the steering rack by about 1/8 to 3/16 inch.
26Likes
Hybrid Mode
