Bob P. - What's Wrong with this Picture?

[strictlypersonl]

Interesting...
The "Subaru style" was a long time ago, but we ended up having the bushing custom-molded by Energy Suspension because we couldn't get the original ones anywhere. If the ones you receive aren't correct, we've still got a bunch here.
The only lube I would use is some silicone spray. It helps preserve the rubber and makes installation easier.

[patrickt]

That appears to be a Flaming River rack #FR1502 3X3 that you all modified to remove the little circular mounts by grinding them off flush. Remember, this was back in early 2006.

[strictlypersonl]

Originally Posted by patrickt

That appears to be a Flaming River rack #FR1502 3X3 that you all modified to remove the little circular mounts by grinding them off flush. Remember, this was back in early 2006.

You are correct. We machined the housing to duplicate the previously-used Subaru rack. We wanted to avoid changing the chassis brackets. For a while, there were companies that could supply rebuilt Subaru units, but they eventually dried up, so we changed the basic setup.

[patrickt]

Originally Posted by strictlypersonl

You are correct. We machined the housing to duplicate the previously-used Subaru rack. We wanted to avoid changing the chassis brackets. For a while, there were companies that could supply rebuilt Subaru units, but they eventually dried up, so we changed the basic setup.

OK, will you pop two of the rubber insulators that fit there in the mail to me? I'm still at the same address. Include an invoice should you feel the need. I'm pretty sure the Energy Suspension part that I ordered is not the right one. I really should have known better, since it was only four dollars. Thanks.