12-08-2009, 07:27 PM
|
 |
Half-Ass Member
|
|
|
Join Date: Jun 2005
Cobra Make, Engine: ERA #732, 428FE (447 CID), TKO600, Solid Flat Tappet Cam, Tons of Aluminum
Posts: 22,025
|
|
Not Ranked
Quote:
Originally Posted by elmariachi
Mine at .050 is 28*.
|
Yes, your four degrees, at the cam, less of lobe separation is pretty significant. The lobe durations are effectively the same, but you have a higher performance cam than mine. The next step up, back in the day, was the cam that DCDoug has (the "B" cam). As I recall, the LSA on that was 106 but still the same lift and duration that I have.
Last edited by patrickt; 12-08-2009 at 07:29 PM..
Reason: typo
|
Threaded Mode
