fe block and head questions?

[wrench87]

i am using the arp head bolts, i have the studs also, but when the cylinders were done bolts were used for the tourque plates and i wont have to machine the erson rockers for clearance.

[elmariachi]

Originally Posted by wrench87

i am using the arp head bolts, i have the studs also, but when the cylinders were done bolts were used for the tourque plates and i wont have to machine the erson rockers for clearance.

And depending upon how your engine sits in the engine bay, using bolts instead of studs could make it easier to remove a head if needed without raising or removing the engine.