03-25-2002, 02:03 PM
|
 |
CC Member
|
|
|
Join Date: Aug 2000
Location: Chicago,
IL
Cobra Make, Engine: ERA 454 S.O.
Posts: 1,684
|
|
Not Ranked
ecp:
I have a set of Edelbrock heads with the same size valves as your medium risers do. With $1,000 worth of porting they flowed 335 cfm and 240 cfm @ .650 lift.
Made 585 hp @ 6,000 rpm on pump gas with an Edelbrock dual plane intake and solid lifter (no roller) cam.
__________________
Jeff
“If you can make black marks on a straight from the time you turn out of a corner until the braking point of the next turn, then you have enough horsepower.”
Mark Donahue
Last edited by Jeff Frigo; 03-25-2002 at 02:08 PM..
|
Threaded Mode
