Fluidamper and which pullies?

DougD · #1 (**permalink**) 02-06-2007, 01:11 PM

I'd like to put a Fluidamper harmonic balancer on my 427. Will this affect the alignment of my pullies for the water pump and alternator? I'm going for a stock look, so aftermarket March or similar pullies would not be my first choice. What pullies do I need to line up with the new balancer?

dragon462 · #2 (**permalink**) 03-06-2007, 07:32 PM

if you use the Fluidamper harmonic balancer you will need to have your motor rebalanced. i put one on mine and they had to add 19grams to my crank

82ACAUTOCRAFT · #3 (**permalink**) 04-09-2007, 12:24 AM

I don't understand, the 427 is balanced internally, if done properly, as long as you harmonic balancer has zero balance it should be fine. Correct me If I am wrong but the Fluidamper is actually designed for the 385 engine, it has to be machined to go on an FE, correct?

DougD · #4 (**permalink**) 04-09-2007, 06:34 AM

I decided to go with the original balancer. Now I'm looking for the correct timing pointer which is missing. Thanks dragon462 and 82acautocraft for the replies.



FE Forums sponsored by Keith Craft Inc.