antifreeze dripping out the bellhousing

[patrickt]

Originally Posted by saltshaker

I have antifreeze dripping out the bottom of the bell housing and it's not from the intake or heads....any suggestions or thoughts?
Jon

Pin-hole leak in the back of the jacket. If you're lucky, a bottle of this will fix it. You should certainly try it before pulling things apart.

[saltshaker]

I'm wondering if it is one of the three plugs around the cam plug. after installing the backing plate and the trans for mock up it was taken apart and I noticed that the allen screw had made a impression on the backing plate ( Lakewood)..
I hope I didn't screw up the block
Jon

[Dwight]

[patrickt]

Originally Posted by saltshaker

I'm wondering if it is one of the three plugs around the cam plug. after installing the backing plate and the trans for mock up it was taken apart and I noticed that the allen screw had made a impression on the backing plate ( Lakewood)..
I hope I didn't screw up the block
Jon

You mean the oil plugs? Those would leak oil.