Injector Search

[bobcowan]

Well, I'v been searching. If looked all over the web, and cannot find this part number anywhere. It must be some special limited edition injector.

I'v talked with a couple of companies who can clean and rebuild them, so that's what I'll probably do.

One company said they could thread any Delphi Injector. So I might end up replacing them all.

I'm not sure what the flow rate is on these. I used to think it was 32#. But I was surprised that 32# injectors would feed this engine - especially on alcohol. But they do. Once I removed them, I can see three holes at the bottom, all about 5/32" around. those are some big holes!



I have a race coming up in 10 days. I'm not sure I want to ship my injectors half way across the country, hoping to get them back in time. OTOH, I don't want to be racing with questionable injectors. If one dies, it will lean out a cylinder and burn a piston. Or if it floods, it could fill the cylinder with fuel = bad things happening.

[Caprimaniac]

"One company said they could thread any Delphi Injector. So I might end up replacing them all."

This mean you need the threads....

I suggest swapping to O- ring fuelrail & have easier access to injectors.

In theory, 32 lbs are too small to supply ethanol for a race spec 351/408. Although you might stretch this by fuel pressure.

It'd supply enough fuel for 500 Hp gasoline engine, is my guess.

Seems like your injection setup works well.
Good luck in the race.
RS