Stacked EFI- advise/thoughts and poll.

[RodKnock]

Is it beneficial to run without a distributor? Does it cost more or less? Is $10,000 "all in" (parts, labor, tuning, etc.) about right for these setups?

[dynoroom]

Here are a couple I've done using TWM throttle bodies. We're also a dealer for severial electronic systems. FAST, Accel DFI, AEM, & Motec to name a few.










I would say yes, around 8 to 10K. You need the intake manifold, throttle bodies, injectors, fuel system, ECU, sensors, harness, then dyno time and tunning.
But it sure look good.

[rick50]

Didn't you build Carroll Shelbys 1300 HP motor with TWM Induction and twin turbos?

Originally Posted by dynoroom

Here are a couple I've done using TWM throttle bodies. We're also a dealer for severial electronic systems. FAST, Accel DFI, AEM, & Motec to name a few.










I would say yes, around 8 to 10K. You need the intake manifold, throttle bodies, injectors, fuel system, ECU, sensors, harness, then dyno time and tunning.
But it sure look good.

[fkemmerer]

Kevin,

Your are correct, my cobra is not yet complete. The car is about to go back to ERA to complete assembly and then will come to me as a roller. We decided to polish all of the visible aluminum panels on the car so ERA left them off so that we would not get paint overspray on the polished parts.

- Fred

[FUNFER2]

Fred- please email me when you have time.
Kevin

[Mike.S]

Sir; I really like the looks and fit of your Air cleaner Assy, May I ask as to who makes it?, Thank you...Mike