Are vents worth $1000?

[rsimoes]

Eangler shipped the blower so fast, I got it overnight! Very well packed, very good company: http://www.eangler.com/product/356790865msk.htm

So I installed it starting Friday night from 9 PM to 1 AM and finished it Saturday from 8:30 AM to 3 PM. Of course this included doing other little things while I was "at it" and a trip to the hardware store for grade 8 bolts, washers, lock nuts, hose clamps, etc. . .

But the job is done and the tires, or should I say "tyres" don't rub yet. I did hard figure 8's in a parking lot and, no rub. The the car did stall. . .gotta adjust that carb. . .but that's a different project. . .

Let me know if you need any insight on the installation. The hardest part was the wiring, since I wanted it to look invisible once it left the wheel well. Yes, it helps a little, but it's no A/C. The hose part over the headers still need to be insulated. . . I am still waiting for the other fan too. . .

[Dwight]

RED CSX1

this is a poor pic of the vent on the passager's side




driver's side mounted on the tunnel




fan in the wheel well on the passager's side. It's water proof, I've tested it, about a 100 miles in the rain.