FE Motor Mounts -

PANAVIA · #1 (**permalink**) 07-12-2010, 12:47 AM

The STOCK mounts for a FE cobra were they 1958-59 TBird FE mount. -- they work if you cross bolt them. The kirkham mount is an interesting upgrade and if you are in the car that far, the cost should not really be a concern.

FUNFER2 · #2 (**permalink**) 07-12-2010, 06:15 AM

cross bolt ?

Tom Kirkham · #3 (**permalink**) 07-12-2010, 05:34 PM

Quote:

Originally Posted by PANAVIA

The STOCK mounts for a FE cobra were they 1958-59 TBird FE mount...

The original part number is: C1MM-6038-C
I believe this came from a 1961 Mercury Marauder.
Note that the NAPA (Anchor, and Buffalo) replacement part does NOT have the same off set.

PANAVIA · #4 (**permalink**) 07-13-2010, 03:53 PM

Quote:

Originally Posted by Tom Kirkham

The original part number is: C1MM-6038-C
I believe this came from a 1961 Mercury Marauder.
Note that the NAPA (Anchor, and Buffalo) replacement part does NOT have the same off set.

The Anchor product is also the victim of a short bolt to the frame as well.

there is a repro thud mount that seems to work, but it is in short supply.

if you are that far down the road, the K mount is a nice upgrade!

undy · #5 (**permalink**) 07-14-2010, 08:41 AM

The LSC mount used for FEs is a 1964, 65 and 66 full size ford (Galaxy) FE mount. There IS NOT a polyurethane mount available for it. Ask me how I know... ANY other mount WILL require modification to LSC's frame PERIOD.

FUNFER2 · #6 (**permalink**) 02-05-2018, 02:38 PM

Has any company come up with a polyurethane mount for the LSC Cobra ?