Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Lounge (http://www.clubcobra.com/forums/lounge/)
-   -   New, New Chat Thread (http://www.clubcobra.com/forums/lounge/67234-new-new-chat-thread.html)

Joe Wicked 05-14-2008 07:11 AM

Quote:

Originally Posted by Ron61 (Post 842677)
:)

Steve,

Since the ink was puddled and fresh I have a feeling that the cartridge was bad, but when I took it out it showed no ink anywhere on it and the other two were ok. And I have used that one before as I had three cartridges and you changed the 56 for a 59 when you were printing photos. Anyway I had expected to find at least one of the plastic gears with teeth worn or broken off but they all looked great. I have had other printers do much the same but could always find a reason. This was just strange and sounded as if you were grinding gears in a transmission and the paper would come out as if it had been pulled through sideways instead of straight. And I had already printed about 6 pictures before this happened, so something just gave up. As I said, it was an older printer and has had a ton of printing done with it. I really like the new all in one and the colors are better with the newer type ink.

Ron :confused:

I had one that the motor froze up and that caused the gears to grind as it stopped turning as the ink cartridges were sliding, but when it was off, you could slide it manually. It may be something similar. The motor locks up when voltage is applied, but turns freely when voltage is removed.

Ron61 05-14-2008 07:20 AM

Joe,

The motor ran ok when I opened it up and just turned it on. The grinding noise seemed to come from the right side and the motor was on the left. But since I couldn't find anything at all that I could see, I wouldn't rule that out.


Ron :confused:

Joe Wicked 05-14-2008 07:31 AM

Doesn't really sound like that was it though, does it? I know my next printer will be one that I can plug directly into my router. I can only print with 1 PC right now since I still can't get both PCs to talk to each other.

wtm442 05-14-2008 09:08 AM

Quote:

Originally Posted by Joe Wicked (Post 842860)
Doesn't really sound like that was it though, does it? I know my next printer will be one that I can plug directly into my router. I can only print with 1 PC right now since I still can't get both PCs to talk to each other.

I use a USB hub for all my stuff. Computer has 2 USB ports and I connect 2 printers, a DVD drive, web cam, cable for digital camera and probably something else under all the junk! :LOL:

392cobra 05-14-2008 10:00 AM

Quote:

Originally Posted by wtm442 (Post 842583)
Hey Fred

They are rolling out the red carpet for you, BB and the Humpin Ho Sisters in China. The sisters are known worldwide now.

http://i216.photobucket.com/albums/c...o_Entrance.jpg

With Biker Babe's presence and reputation being as large she is,I'm not surprised that she gets her own celebrity entrance.
No doubt it cost a pretty penny to remodel & enlarge all those entrances across their country.


BTW - Just curious...(No Action Required)...Have you mentioned to BB that I'm back home from my motorcycle trip ??

wtm442 05-14-2008 11:19 AM

Quote:

Originally Posted by 392cobra (Post 842904)
BTW - Just curious...(No Action Required)...Have you mentioned to BB that I'm back home from my motorcycle trip ??

Sorry, I guess you did not get the message. As soon as she arrived, I quickly paid the freight company to take her directly to Tru's farm in Ortonville. Tru was in desperate need for some counterweight for his tractor. You'll have to ask Tru where she is now.

http://i216.photobucket.com/albums/c.../farm_wife.jpg

trularin 05-14-2008 11:56 AM

Cute.

Seems like you have gotten attached to that picture of you and your sister.

RAINING!!!

I have 30 tons of screened black dirt coming on Saturday. Going to be a dirt moving weekend.

:D :D

Joe Wicked 05-14-2008 11:59 AM

Quote:

Originally Posted by wtm442 (Post 842887)
I use a USB hub for all my stuff. Computer has 2 USB ports and I connect 2 printers, a DVD drive, web cam, cable for digital camera and probably something else under all the junk! :LOL:

USB ports is not the problem. Both PCs have at least 8. I have 2 PCs and only 1 printer. I can't seem to get the 2 PCs to talk and share the printer. By having a networked printer, I can access it independently by any PC on the network.

rick hubbard 05-14-2008 02:04 PM

a c cobra
 
:confused: hi anybody Rick Hubbard in seattle,,
my grandson and I are looking at buying a partly built cobra, but the company that built it a number of years ago is out of business, its something like fiberfab,, or maybe classic motor carriages, the frame was jig built also by them wa have looked at it , and it comes with almost everything to finish it, but we are wondering if anyone knows anything or has any opinions about this company, I have been looking for a while and this one of the nicer one we have seen, any help would be great Rick Hubbard seattle 206 310 2535

Joe Wicked 05-14-2008 06:32 PM

Rick,
Do a search in the All Cobra Talk forum. If you can't find what you are looking for, Post up a thread with the specifics. You are more likely to get a more helpful response in that forum. Unfortunately, I am still educating myself on these cars and doing my research. I cannot help you.

Good luck and welcome to the site.

392cobra 05-15-2008 11:08 AM

Quote:

Originally Posted by wtm442 (Post 842925)

After hearing & seeing that BB is with Tru I briefly wondered why he has been keeping it so quite.

A close look at the photo answered my question.

They are one happy looking couple !:)

Tru is on his favorite,going to town,tractor,cruising down Main St. with Biker Babe riding *itch.:cool:

Tru,no offence,it looks like BB has taken a slight toll on you.Like you have been rode hard and put up wet a few too many times.:eek:

trularin 05-15-2008 11:24 AM

Lost another battery in the farm truck last night. Dang these things are getting expensive.

:D :D

wtm442 05-15-2008 11:50 AM

How do you "lose" a battery? Did it fall out? Did someone steal it?

Or maybe it died? Did you try to give BB some thrills and short it out?

Better get another before the dirt arrives. I spent about 5 hours moving dirt yesterday, and then I only had time for a 45 minute ride. Oh, the horrors.

My dirt only had to move about an inch or so, and then most of it was returned to fill in around the plant roots. Thankfully there are no batteries in my garden hand tools. :LOL:

Spent most of today cleaning and dusting the house. Ugh. Got to go get some carrots and cabbage for my corned beef dinner tonight. I'm afraid there will not be any leftovers with all the friends that are coming to dinner. :CRY:

Ron61 05-15-2008 11:55 AM

Tru,

With all of that dirt you have coming, maybe you can talk Warren into coming up and helping you.

Ron :)

wtm442 05-15-2008 11:57 AM

Sorry, I'm busy right now. I'm allergic to dirt. Its a 4 letter word.

Hey Fred
I'm not sure if I asked you this before, but is this you trying out a new Eco-friendly ride?

http://i216.photobucket.com/albums/c.../ridingdog.jpg

wtm442 05-15-2008 01:56 PM

While I was waiting in line a the grocery store (Super Stop & Shop), the guy in front of me charged his purchase.

Two bananas ... $0.53

:p%/:JEKYLHYDE**):o

392cobra 05-15-2008 01:57 PM

Quote:

Originally Posted by wtm442 (Post 843059)
Hey Fred
I'm not sure if I asked you this before, but is this you trying out a new Eco-friendly ride?

http://i216.photobucket.com/albums/c.../ridingdog.jpg

Thanks for posting this.

It really looks like the ride for in town,short distances.
The Freeway might be a problem.:eek:

Small,lightweight and nimble,plus very easy to park.

I've decided that I need to make some changes in my life.I need to become as Green as I am PC.:cool:

wtm442 05-15-2008 02:40 PM

Quote:

Originally Posted by 392cobra (Post 843091)
I need to become as Green as I am PC.:cool:

If you keep hanging around the Humpin Ho Sisters you will turn green.

http://i216.photobucket.com/albums/c...nchy-laugh.gif

trularin 05-16-2008 10:22 AM

What an interesting post.

:LOL:

Ron61 05-16-2008 11:47 AM

:LOL:

Avery intellectual conversation isn't it. :LOL: :LOL:

Ron :eek:


All times are GMT -7. The time now is 09:28 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: