04-07-2014, 04:38 AM
|
 |
CC Member/Contributor
|
|
|
Join Date: Feb 2000
Location: Greenville,
SC
Cobra Make, Engine: 70 Shelby convertible, ERA-289 FIA, ERA 289 roadster hybrid, mystery Ford powered 2dr convertible
Posts: 12,771
|
|
Not Ranked
I've always bought them at my local Ford dealer, then swapped the vintage cover over to the new unit.
Bill S.
Quote:
Originally Posted by my427cobra
I sure am dissapointed with the quality of the reproduction Ford regulator and solonoid I bought from one of the big 3 Mustang reproduction parts suppliers.
The first reproduction 1965 Ford regulator I bought was DOA but I thought it was my fault. Bought another one. No go either. Had both tested and both had internal faults.
Bought a good quality modern solid state version, swaspped on the vintage 60's black regulator cover and voila, everything worked!
The first 65 reproduction Ford solonoid stuck "ON" (spinning the started continuously) shortly after installation and after only about a dozen starts. Hit the battery disconnet switch real fast.
Bought another one and now 6 months later it's sufferring a stuck "OFF" symptom (no power to the starter). Give it a rap with a pastic hammer and it works.
So, can anyone recommend a good reliable solonoid? I have a Dralast sitting on the shelf from a local auto parts store.
Thanks for youe help.
Greg
|
__________________
Instead of being part of the problem, be part of a successful solution.
First time Cobra buyers-READ THIS
|
Threaded Mode
