ERA Street Dash For Sale

Excaliber · #1 (**permalink**) 04-19-2006, 05:06 PM

Just a note for those who may all ready have a street dash.

I moved the tach to the Speedo hole and the Speedo to the Tach hole. WOW, I like it WAY better being able to clearly see the Tach. It worked out really well and was no problem at all making the swap with the cables or wires (both of which were long enough to easily accomadate the new location).

The dash is fairly easy to swap\remove\install.

HSSS427 · #2 (**permalink**) 04-19-2006, 07:02 PM

Mickmate - the dash is 54" from end mounting hole to mouting hole, and a total of 55" in width. At the center the dash is 9" high.

It is specifically made from fiberglass for the ERA.

BTW Excal - good idea and a heck of a lot cheaper!

Hard to see from this top view, but the ends of the dash curve in then flatten out where the mounting holes are on each end.