Quote:
|
|
Made some progress Saturday.....
http://img10.imageshack.us/img10/9405/hpim5800g.jpghttp://img16.imageshack.us/img16/4232/hpim5802.jpg I could not wait any longer had to add the Webers.... This week adding NOS HiPo chrome valve covers. :cool: http://img686.imageshack.us/img686/8418/hpim5799.jpg |
very good progress on your project
|
Does your frame allow for clearance of that monster oil filter?:eek:
|
That's just on there to cover the hole, it's getting remote.
|
Go
can we get some pics of the transverse leaf spring , I think it look so cool and wrong lol
SDR ________ Buy vaporizers |
Springs you say? :eek:
http://img51.imageshack.us/img51/5493/hpim5784.jpghttp://img189.imageshack.us/img189/6092/hpim5785.jpg http://img237.imageshack.us/img237/1908/hpim5786.jpghttp://img21.imageshack.us/img21/8316/hpim5787.jpg Very old school if I do say so myself.....:cool: |
those buggy springs are so cool
|
They do look cool indeed!
|
Go
|
Started rough flare templates today.
Installed NOS Lucas tailights and added bungee holes for boot tie down. What do you think? http://img9.imageshack.us/img9/4092/hpim5809.jpg http://img22.imageshack.us/img22/3894/hpim5808.jpg http://img191.imageshack.us/img191/7422/hpim5810.jpg |
Looks fantastic!
The bungee hole on original comp cars had ring with a small center indentation that went through the body. Does someone make those or are you going to have to make them? Larry |
Larry
I have a pair just not mounted as they will remain unpainted in raw ally after paint. Nice eye catching that detail!;) |
I like it, someones been studying flare shapes.
|
hi jeff,
i like that there are some similarities with mine rear flares regards, ozgur |
Looks great, Jeff! I'm betting you'll beat me to getting your car on the road before mine!
|
Looks great! Are the bungee grommets a an item you can buy somewhere? I just put some rings in there, on my car. I haven't been able to get a close up look at a car that has them yet to see how they are made.
|
Hyde
There is no magic on these they are simply ally washers with a 9/16" center hole with 1.25" outer diameter and about 3/32" thick. All the originals I have had the opportunity to inspect seem to differ so I chose something that was close to what I have seen the most of. SAI didn't go out of there way to make it hard, washers do the trick. I have seen most applied via 4 rivots however I have seen some with 3, I will do 4. ERA sells them in a cut form, $25 pair if I remember right, washers are about $0.50 each. Had the ERA version on my CCX. CSX3020 http://img69.imageshack.us/img69/5412/saac310325.jpg CSX2345 http://img132.imageshack.us/img132/98/722006261.jpg CSX2430 http://img696.imageshack.us/img696/9572/csx2430cmed.jpg |
Thanks for the info. That's one of the little projects left to do
|
All times are GMT -7. The time now is 11:54 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: