New Build

[cobrakiwi]

Originally Posted by Bernica

Just awesome workmanship! Looks great!!
Did you have fun cutting the oval hole for the roll bar?

Just about as much fun as the front bumper / quick jack mount holes
actually cutting the holes is not to bad, its getting them in the right place that can be a bit tricky

Couple more Pic's just before the car was taken apart and shipped off to paint,
Rear end mocked up, and windscreen in place.

[cobrakiwi]

Pushed it outside for a look, then pulled it all apart and sent it off to paint.

[cobrakiwi]

Project fuel Cap,
my client sent me his Enots fuel cap, the base was in bad shape and the mounting holes were not setup for a cobra.

I welded the old mounting holes, cleaned up the flange in the lathe then drilled the new 6 mounting holes.

Then I made up a 4 inch fill neck to match the large 42 gallon fuel tank fill neck.

I also have the red gaskets and spacers to clock the fuel cap to the base flange available if anybody is interested for that original touch.

Nice touch for his build

[cobrakiwi]

Looks like a lot of the the pictures here are gone?
I am expecting this one back from paint any day now

[1795]

Very well done! The site has had some problems recently and I have noticed that old pictures on some other threads have been missing too. Looking forward to more new pictures.

[cobrakiwi]

deleted, wrong thread

[1795]

Coming along nicely. Wish that I could be out in the barn working on things, just way to cold. Tired of grabbing frozen wrenches