|
Thanks for the complement Jeff,
I really do appreciate all the positive comments. Quote:
|
2 Attachment(s)
I was able to get a few hours in today on the build, I made a few more panels for the trunk, I need more clecos to finish the trunk up, (on order) then I made the dash panel up.
|
2 Attachment(s)
Made up a few more panels over the last couple of days, finished the lower rear bulkhead panels.
Installed the radiator so I could start on the panels in the nose of the car. |
2 Attachment(s)
After making the panels around the radiator, I was able to finish up the nose panels, then move onto the panels for the oil cooler shroud.
This is about it for alloy work forward of the rad.:) |
convert edrw to CAD
Nice spare wheel insert (trunk floor)!
I had my laser cut people digitise one of my fibre parts years ago and it came out quite well, including the rivet holes and bend/fold lines. Unfortunately I only have the SolidWorks file left (the CAD is lost) and can't make the part anymore.. I tried to upload, but the file format is not supported. Anybody who wants it, drop me a PM. I hope somebody can convert it back to a CAD. It's not 100% refined yet. If I remeber correctly I need to add some clearance along the bends. |
1 Attachment(s)
Dominik,Thanks for the positive comments, you should start a thread and show your builds. Sounds like you have built some nice stuff.
I got to make a couple more panels today. |
2 Attachment(s)
I was able to finish up the inner front panels,
|
2 Attachment(s)
The last couple of days I have worked on getting the foot box's and firewall in place.
|
All I can say is……DAMN!
|
Wish Santa would have left that in my stocking, Craig.....amazing.....wanta trade for a nice Hi-Tech :D
|
Some real impressive work. Wish I had the skill level that you do!
|
Simply outstanding work! Keep it up and keep the updates coming!;)
|
1 Attachment(s)
Quote:
there were a few things Santa could have left for me as well, I will take your HiTech in on trade, you have my Number:) Thanks for the great comments guy's!!! Got to work on the passenger side floor today. |
Craig
You are a master......😎 Comment, on original cars the alloy under door hinge is two peice. Allows the hinge pin to fit through bottom. You have the angle to be able to insert? Just an FYI before installing. Jeff |
1 Attachment(s)
Quote:
good point, just not there yet, as you point out there needs to be a cut made to make clearance for the door hinge bolt to be installed and removal. I like to make the floor board in one part then cut, I just find it a little easier to hold and fold everything. Here is a picture of the cut that needs to be made, this is the floor board from one of our other 427 cars. |
The master
Awesome. |
Craig - That looks absolutely awesome. Keep the pictures coming...
|
Quote:
Hope to see some progress on your build soon. |
2 Attachment(s)
Floors are just about finished, had time today to make up the trans tunnel.
Just about time to start drilling and cutting holes in the body:eek: |
cobrakiwi,
How long does it take you to make a roller from start to finish? |
| All times are GMT -7. The time now is 12:40 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: