427 Build by Cobrakiwi

cobrakiwi · #1 (**permalink**) 02-05-2016, 06:02 PM

Quote:

Originally Posted by Bernica

Yeah, I have a 1/2" shim under drivers side motor mount to try to fix just that! Then, your passenger side header pipes coming out of the body start to rub the bottom of the body outlet. THEN, you end up with the driver's side throttle linkage up against the head / headers. It's something of a conundrum that has haunted me for a while...

Was the air cleaner interfering with the hood cut out?

Bernica · #2 (**permalink**) 02-06-2016, 10:02 AM

Quote:

Originally Posted by cobrakiwi

Was the air cleaner interfering with the hood cut out?

It wasn't lining up so I had to either use a shorter air filter or move things over. I think in my case, the problem was compounded by the way Shelby installed the footbox.

cobrakiwi · #3 (**permalink**) 02-09-2016, 02:02 PM

More parts ready for powder coating, these are the control arm covers that go behind the seats and in the trunk.
I never did like the fiberglass ones as they never seemed to fit that well.