CSX 4000 series body / frame assymetry

mrmustang · #1 (**permalink**) 03-03-2009, 07:05 AM

Quote:

Originally Posted by NC427

Having read all the above I think I understood where the fibre cars are now being made.

What I have not found is an information about the non-fibre version. Is that still manufactured for Shelby by Kirkham?

Yes..........

NC427 · #2 (**permalink**) 03-03-2009, 07:08 AM

Wow - This was fast - Thanks a lot - So one can expect that those are not facing the same problems like the fibre versions - That is good news......

kris-kincaid · #3 (**permalink**) 03-03-2009, 08:33 PM

NC427, Not all of them are made by Kirkham. Shelby has a vendor in England who is also making aluminum bodies for them.

Quote:

Originally Posted by mrmustang

Yes..........

Do you just like to see yourself post? You should at least be right before you do so.

mrmustang · #4 (**permalink**) 03-03-2009, 08:42 PM

Quote:

Originally Posted by kris-kincaid

NC427, Not all of them are made by Kirkham. Shelby has a vendor in England who is also making aluminum bodies for them.

Do you just like to see yourself post? You should at least be right before you do so.

So, bad day at the office/shop?

Dave Kirkham's own signature line (current) states the following:

Supplier of frames and aluminum bodies to Shelby* for their CSX4000, CSX7000, and CSX8000 289 and 427 Cobra

As for the response to his original question as posted, the correct answer was YES. He did not split hairs, not quite sure why you are at this point in time either.

Bill S.