AC alloy repro pedals

Phlize · #1 (**permalink**) 11-10-2022, 02:14 PM

Hi,
I have a pair of AC logo repro alloy foot pedals, brake & clutch.
They have a spring with each but I'm not clear how exactly this spring fits?
Anyone have a photo - or just a good description.

Help appreciated.

Phil.

S1965C · #2 (**permalink**) 11-10-2022, 02:50 PM

Have they already been machined with a hole on the back brace? If so, the thru-bolt mounting hardware goes inside the spring to create the sprung pressure to keep the pedals vertical.

patrickt · #3 (**permalink**) 11-10-2022, 03:13 PM

Uhhhh, like this maybe?

MAStuart · #4 (**permalink**) 11-10-2022, 06:34 PM

Here s a picture that I think is close to how the original one was set up. The left one is a spring made. I like the way it fits better than the spring I purchased. The right one does not have a cotter pin installed yet.

Name: 100_1269.jpg
Views: 192
Size: 88.7 KB

Name: 100_1269.jpg
Views: 192
Size: 88.7 KB

patrickt · #5 (**permalink**) 11-10-2022, 06:47 PM

I guess that shiny nut and bolt on mine is an ERA thing.

MAStuart · #6 (**permalink**) 11-10-2022, 08:34 PM

Well that bolt makes it nice to position the pedal.

Phlize · #7 (**permalink**) 11-11-2022, 01:54 PM

Many thanks for the replies guys.
Mine are exactly like those you have MAStuart.
Great photo - I didn't realise that they should have cotter pins rather than bolts so I'm glad I asked the question.

Thanks again,
Great Community!
Phil.