SPF sideview mirror

ou812545 · #1 (**permalink**) 02-09-2008, 08:11 AM

Any new ideas to this problem.
I ordered the convex mirror from Performance Unlimited and it's a little bigger diameter than sideview mirror on the SPF. It will work but it's not the best looking.

Any other ideas?

Dwight · #2 (**permalink**) 02-09-2008, 08:37 AM

I have made a couple of badges to cover the holes left when we moved the mirrow. I used stainless and bend it to fit the curved fender. Polished it and had a local knife store to engrave it (acid etch). I used doubleback tape to attach it to the fender. I have made several mirrow mounts for the windshield. Thin stainless, cut, shape and polish. I use the same mirrow that was on the fender.

Dwight

Badger · #3 (**permalink**) 02-09-2008, 04:13 PM

Mirrors have always been a problem on Cobras. If you'll go to BRE2.net you'll see the proper solution. Badger

STL Mark · #4 (**permalink**) 02-09-2008, 04:59 PM

Neat site - that TR7 looks so cool - if only they would have built it!

J Persons · #5 (**permalink**) 02-09-2008, 04:59 PM

If you decide to replace the mirror, look at one of these. I use the 4" model, and it works great.
peep mirror