Alternative to hood scoop...

[Carnut427]

I'm sure this is overkill for what you're looking for, but it is "original", used on CSX3015 & CSX3303, the twin paxton 427s belonging to Carroll & Bill Cosby:



Photo courtesy of Cobrajeff; used without permission.

[Mike Simard]

Hyde, is that a paint roller tray?
'lakester, 14" drop base aircleaners can be good in situations like yours. You can have alot of drop and still have good flow, the linkage arm will probably determine how low you can go (limbo music). I used to use one, the raised center section fit within the scoop but the outer edge was just too big to fit within the scoop and would nearly touch the edges, it was tempting to modify the outer edges by squashing them inward a bit. There are also some offset bases available: http://www.pitstopusa.com/detail.aspx?ID=55371

[*13*]

Damn nice roller try if it is

[*13*]

Originally Posted by Carnut427

I'm sure this is overkill for what you're looking for, but it is "original", used on CSX3015 & CSX3303, the twin paxton 427s belonging to Carroll & Bill Cosby:



Photo courtesy of Cobrajeff; used without permission.

You go mounting that hood on your car & you open the hood to w/o twin paxtons there are bound to be a few dissapionted guests It is a very intimidating look though