oil puke tank line routing

mickmate · #1 (**permalink**) 12-11-2009, 05:09 AM

Hey Alf, 427's use a hose to the intake manifold, a smaller one to the trans cover, a draft tube to the tunnel and a lower drain tube to the pan. It looks like the 289 picture has the breather to the valve covers and one underneath it heading to the pan? The other side looks like a draft tube up high maybe a tranny one below it?

*13* · #2 (**permalink**) 12-11-2009, 07:24 AM

I looked to see if I had a better picture of that car, I don't. I'd agree that the bottom line looks like it may be heading to the pan? Could be to the intake but that might be a squeeze with the linkage. I've been hoping to see that car again to see some more of the engine compartment details. If I do I'll get some pictures

ALF · #3 (**permalink**) 01-04-2010, 04:52 AM

Hello

Many thanks for your feedback.
I've now the tank in my hands and I'm still trying to find the correct way to connect it!

As I use a 289 T-Pan and a Weber 48IDA intake I'm not sure where and how to connect there.
i.E.. there is no breather on the intake and I don't remember one on the T-Pan.

Appreciate any help (best with picture or drawings). This helps to reduce misunderstandings!