single/dual plane intake

ERA Chas · #1 (**permalink**) 03-09-2010, 01:29 PM

Quote:

Originally Posted by blykins

That cam shouldn't be that wild. I think an RPM Air Gap would suit the engine well. If you're having hesitation issues, it's most likely a carb tuning issue.

X2-what Brent said.

CobraEd · #2 (**permalink**) 03-09-2010, 01:42 PM

The lift is very high for that mild duration. I have not seen that cam listed. Is it custom from Comp Cams?

.

FUNFER2 · #3 (**permalink**) 03-09-2010, 02:27 PM

(high lift) ? It looks like that's "advertised" duration.

Gary Stubbs · #4 (**permalink**) 03-09-2010, 02:36 PM

A 35-450-8 or a 286H-R10 by comp cams

CobraEd · #5 (**permalink**) 03-09-2010, 02:59 PM

That must be one of the two versions that Comp Cams makes specifically for the stroker 302 (331/347). I have seen them in Jegs.

With 286 total duration and .598 lift. I still believe that is a lot of lift the that small amount of duration.

However, if it works, it works. Just hope it lasts. With that lift to duration ratio, it can put a big strain on the valves.

.